KRAUS Stainless Steel Versi Drain Assembly with FlipCap, ST-4

what our customer say this product:

Powered by

1. Paybackone Verified Buyer – 17 July 2024

   Was looking at single line cold water faucets for filtered water and came across this drain cover .. I didn’t know or think I needed it … well, it got here a few days ago , looks great and works great … it ain’t going back , I like it ! … I found out how to keep it from getting dull looking with water spots when it drys …. a well spent 2 minutes – polished it with car wax !
   Like everything else there are cheaper ones but they are not this one , this is the one to buy . This is not a stopper for holding water and filling your sink , it is a decorative cover that is well made !
   

2. HVAC TECH Verified Buyer – 2 August 2024

   EASY TO INSTALL
   WELL WORTH THE MONEY OVER THE BIG BOX STORES.
   

3. Ben Verified Buyer – 6 December 2024

   So far so good – this was easy to install, and so far no leaks! I used silicone instead of plumbers putty between the top lip of the drain and the bottom of the sink. This is made with a number of plastic parts, which does feel a little less sturdy/robust than I would like, but overall they seem durable. I like the clean look with the flip cap covering the strainer! It is fairly easy to use, just pushing down on the whole thing to plug the sink, and pushing gently on the lip at the edge of the cap to flip it up and be able to pop the whole thing back up and unplug the sink. Detaching and re-attaching the flip cap from the strainer isn’t the smoothest/easiest, but isn’t something I’ll need to do very often if at all.
   

4. Brent Verified Buyer – 13 February 2025

   We just did a “Dream Kitchen” remodel in our 1929 house. Twin 36” Sub Zeros, Thermador range, new cabinets, quartz countertops with a deep, single bowl under-mount sink. My wife is very happy with it and wouldn’t change a thing. She didn’t know this type of cap even existed. I ordered it and put it in last night and her response was epic. She saw it and said “Oh my goodness! I never even knew I wanted one of those!”. Yep, $80k on a new kitchen and I blew her socks off with a $20 sink cap!

   First, don’t confuse this cap with one which costs half as much, by GZILA. That one is a sink STOPPER, this one allows water to flow freely past it while installed.

   Second, I installed it over an ISE Disposal (the industry standard), and as you can see, it is a perfect fit. Others have commented on it not fitting tight and that is true. There is a slight amount of “play” when it is installed, but very little. I have included two separate up close photos with the cap installed. One of them is “centered” and one is with the cap intentionally slid to one side as far as it will go. See if you can even tell which photo is which.

   This cap will also fit the non-disposal side of a two well sink (Hint: all kitchen sinks [not all wet bar sinks] have standardized holes for drain connections, it is literally “one size fits all”) , so you might want to order two of them.

   If you are proud of your kitchen, this is the item “you never knew you needed” to make it look so upscale. Just buy one (or two) already. I doubt we will ever be without one of these again.
   

5. Fereshteh Jabbari Verified Buyer – 27 February 2025

   Very nice ,fit ,excellent quality.
   Highly recommend.
   

6. Torontogirl Verified Buyer – 10 March 2025

   Covers the ugly drain and makes the sink look clean and tidy.
   

7. cozald2000 Verified Buyer – 24 March 2025

   Great part
   

8. ancient-heart Verified Buyer – 7 April 2025

   High quality material that enhances the look of our kitchen sink. If you need one, we recommend this item.
   

9. Canadian Customer Verified Buyer – 2 May 2025

   Great qualtiy and looks very nice . would sugest this as a good item.
   

10. Curt Verified Buyer – 3 May 2025

    Both of the ones I ordered had very poor threads in the plastic for attaching the drain stub. I thought maybe it was my old nut so I bought new down stubs with a plastic nut and same problem. I had to file out casting seams and sand the threads smaller (not at tall peaks) to get it to work. Otherwise they are a fantastic piece that is easy to install and looks wonderful. The stopper works very well. No more turning and pushing to hopefully get a seal, they pop in and seal great. 4 stars because I was very disappointed with the threads being so poor.
    

11. PEI YING Verified Buyer – 6 May 2025

    It looks nice covering the drain hole and block large food items from flowing down. Other than that cannot think of any other functions.
    

12. regina joseph Verified Buyer – 7 June 2025

    It was perfect
    

13. Stacy Nichols Verified Buyer – 9 June 2025

    Looks/ works great